top of page

Fire Testing Resources

Practical guides for planning hydrant, fire pump, standpipe, and pressure-reducing valve tests. Find equipment checklists, measurement explanations, and ways to use Brandco wireless equipment in your testing setup.

calculator-hydrant-cartoon-icon.png

Fire Hydrant Flow Test Calculator

Estimate flow at a chosen residual pressure and calculate pressure drop from your test readings

Open Calculator

Knowledge Base

How to Perform a Fire Hydrant Flow Test

 

Follow a practical planning sequence for site preparation, static and residual pressure readings, flow measurement, and documentation. See how Brandco wireless equipment brings remote hydrant pressure to the technician at the flow location.

Static vs Residual Pressure in a Hydrant Flow Test

 

Understand what static pressure, residual pressure, and GPM tell you about a hydrant test. Work through a pressure-drop example and see how Brandco helps keep pressure and flow observations together.

How Many People Are Needed for a Hydrant Flow Test?

 

Plan staffing around hydrant operation, pressure readings, discharge control, traffic, and record keeping. Explore where Brandco remote readings can reduce coordination and where the site still needs additional people.

Hydrant Flow Testing Equipment Checklist

 

Prepare the pressure instruments, flow devices, connections, site controls, and documentation needed for a hydrant flow test. Compare Brandco wireless options and check equipment compatibility before arriving at the test location.

How to Conduct a Fire Pump Flow Test

 

Review the measurement workflow for a fire pump flow test, from planning and equipment setup to recording and restoration. See how Brandco brings suction pressure, discharge pressure, RPM, and compatible stream readings together.

How to Measure Fire Pump Suction and Discharge Pressure

 

Understand suction, discharge, and net pump pressure, then review measurement points, sensor setup, and useful records. See how Brandco displays both pump pressures remotely alongside RPM during a flow test.

How to Measure Fire Pump RPM

 

Learn how to prepare an optical tachometer, establish a stable target, and check RPM at each test condition. See how Brandco brings measured pump speed together with suction and discharge pressure.

How Many Hoses Do You Need for a Fire Pump Test?

 

Work through the factors that determine hose requirements, including target flow, available pressure, hose dimensions, elevation, and device limits. See how Brandco monitors multiple streams without confusing sensor capacity with discharge capacity.

Pitot vs Pitotless vs Diffuser Flow Testing

 

Compare how pitot instruments, pitotless devices, and diffusers measure or manage a test stream. Review device compatibility, flow settings, and the role of Brandco wireless pressure readings in a suitable setup.

Wireless vs Analog Pressure Gauges for Fire Testing

 

Compare local analog readings with remote wireless visibility, including calibration, pressure range, communications, and record keeping. Explore how Brandco equipment supports fire testing and what to check when choosing an instrument.

Standpipe Flow Testing Equipment

 

Build a standpipe test equipment list around pressure measurement, flow measurement, discharge control, and coordination. See how Brandco can provide remote pressure visibility, with attention to instrument range and communication inside the building.

PRV Testing Procedures and Equipment

 

Review pressure-reducing valve test planning, inlet and outlet measurements, flow conditions, and documentation. See how Brandco wireless senders help observe multiple pressure points while the test follows the installed valve’s requirements.

bottom of page